NOMEX
vs.
FuFu's Flame Resistant Polyester Thread

NOMEX information:

NOMEX thread is what is considered to be a flame retardant thread. It is the actual yarn used to make the textile for uniforms for fireman, race car drivers, electricians, etc. It was not designed for embroidery, but to meet specification for certain workwear, it is used for this purpose. NOMEX thread will not char at temperatures higher than 675 degrees F.

Category: 100% Meta-Aramid Fiber
Tex Size: T-40
Ticket Size: 45/3
Yarn Size: 39.90/3
Strength: 2.48 lbs. (single end break)
Elongation: 25.50%
Yield Per Pound: 11,172
Shrinkage: Boiling Water = <1%, Hot Air = <.5%
Loop Strength: 3.72 lbs
Loop Strength Ratio: 1.5
Seam Strength:
301Ssa-1 Lockstitch (8 spi) = 29.76
401Ssa-1 Chain Stitch (8 spi) = 33.75
Needle Size: 80 (metric)
RoHS Compliant: YES
Non - Wicking

****Note: All physical data above is based on current averages and should NOT be used as minimum requirements. The recommended needle sizes are based on the thread size and are for guidelines only. The actual size may depend on many factors including seam construction, machine speed, fabric type and weight, etc. ****

FuFu's RH Flame Resistant Polyester Embroidery Thread information:

This thread was developed to conform to US CFR 1615/1616 legislation covering the fire resistant fabrics and trims specifically for children's clothing and sleepwear.

The melting point for this thread is 500 degrees F.

(Lab reports for this thread are available upon request.)

For more information please feel free to email your questions to Mescoltd@aol.com